Taulman Nylon 230 - 1.75mm - 450g
|Numéro de l'article:||20714|
|Disponibilité:||En rupture de stock|
Taulman Nylon 230
Nylon 230 is the first nylon ever developed to be printed at 230C or a lower temperature than any other 3D Printing Nylon.With the release of Nylon 230 Taulman3D will provide owners of PLA only or PLA and ABS only 3D Printers to add high strength Nylon to their list of material choices. In addition, Nylon 230 prints on Blue tape, and even better on "built-tak" type surfaces as well as print bed treated with various PVA glues/glue sticks.
Heated bed temperatur
Due to the low warp effect is not absolutely necessary.
45°C with coat of PVA
or cold on BuildTak or glass with coat of PVA
reel hight: 70mm
Hub hole diameter: 19mm
Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.
80% of ABS speeds
1mm for a 0.1mm nozzle or
5mm for a 0.5mm nozzle