NinjaFlex Filament - 1.75mm - 0.5 kg - Fire red

€39,90 €35,00
Availability: In stock (11)

 

_x005F_x000D_

NinjaFlex's unique flexibility and smooth feeding characteristics enable you to create in ways you never thought possible.

_x005F_x000D_

Best Suited For:

_x005F_x000D_
    _x005F_x000D_
  • Fused Deposition 3D printers that use 1.75mm or 3mm filament.
  • _x005F_x000D_
  • 3D printers that accept other types of filaments such as ABS and PLA
  • _x005F_x000D_
_x005F_x000D_

Have a question on NinjaFlex? Read our Frequently Asked Questions below

_x005F_x000D_

Features:

_x005F_x000D_
    _x005F_x000D_
  • Filament shore hardness of approximately 85A
  • _x005F_x000D_
  • Consistent diameter and material properties provide reliable, high quality prints
  • _x005F_x000D_
  • Patent pending technology allows for smooth feeding
  • _x005F_x000D_
  • Low tack, low CoF exterior allows smooth feed through filament guides
  • _x005F_x000D_
  • High elasticity and excellent abrasion resistance
  • _x005F_x000D_
  • Excellent build platform adhesion and bonding between layers
  • _x005F_x000D_
  • REACH and RoHS 2002/95/EC Directive Compliant
  • _x005F_x000D_
  • 1.75mm filament spool = .50 kg
  • _x005F_x000D_
  • 3.00mm filament spool = .75 kg
  • _x005F_x000D_
_x005F_x000D_

Processing Guidelines:<ul">

_x005F_x000D_
    _x005F_x000D_
  • Recommended extruder temperature: 210 - 225°C
  • _x005F_x000D_
  • Recommended platform temperature: 30 - 40°C
  • _x005F_x000D_
  • Recommended  print speed 30mm/sec
  • _x005F_x000D_
_x005F_x000D_

 

_x005F_x000D_

 

_x005F_x000D_

 

_x005F_x000D_
    _x005F_x000D_
  • _x005F_x000D_

    FAQs

    _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_
    What type of extruders work with NinjaFlex?
    _x005F_x000D_
      _x005F_x000D_
    • Extruders that utilize a spring loaded roller bearing to create pressure against the extruder drive gear.
    • _x005F_x000D_
    • Because of its flexibility, the filament must also be supported between the exit of the drive gear and the entrance to the melt chamber.
    • _x005F_x000D_
    • A good example of this type of extruder mechanism is shown here:http://www.thingiverse.com/thing:147518
    • _x005F_x000D_
    _x005F_x000D_
    _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_
    Is it necessary to coat the build platform with Kapton® tape or hairspray?
    _x005F_x000D_
      _x005F_x000D_
    • NinjaFlex bonds well to most surfaces (including aluminum and glass), so coating the build platform is not necessary.
    • _x005F_x000D_
    • Kapton tape can be used with NinjaFlex, but the adhesion of the printed part to the tape may be stronger than the adhesive holding the tape to the build platform.
    • _x005F_x000D_
    _x005F_x000D_
    _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_
    Will NinjaFlex feed well through plastic guide tubes?
    _x005F_x000D_
      _x005F_x000D_
    • While the low coefficient of friction surface of NinjaFlex has been formulated to reduce surface tack and allow the filament to feed more easily, the use of PTFE guide tubes may be beneficial to further reduce pull at the extruder.
    • _x005F_x000D_
    _x005F_x000D_
    _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_
    Is NinjaFlex rated for food contact?
    _x005F_x000D_
      _x005F_x000D_
    • Although NinjaFlex does not contain BPA or other toxins, it is not recommended for food contact applications.
    • _x005F_x000D_
    _x005F_x000D_
    _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_
    Are there any special printer settings that need to be adjusted for NinjaFlex?
    _x005F_x000D_
      _x005F_x000D_
    • NinjaFlex generally works well at similar extruder settings to ABS, however adjusting the printers retraction settings can improve stop/start print quality.
    • _x005F_x000D_
    _x005F_x000D_
    _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_
    Any other tips for using NinjaFlex?
    _x005F_x000D_
      _x005F_x000D_
    • When switching from another polymer (such as ABS or PLA) purge thoroughly before starting a print.
    • _x005F_x000D_
    • As with other materials, when preheating, use a lower temperature (~180-200°C) to prevent excess material from draining prior to starting a print.
    • _x005F_x000D_
    _x005F_x000D_
    _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_
    Are there any safety concerns or considerations when using NinjaFlex?
    _x005F_x000D_
      _x005F_x000D_
    • NinjaFlex should be used in a well-ventilated area according to recommended operating conditions.
    • _x005F_x000D_
    • TPE products are capable of releasing small amounts of fumes at high temperatures. While these fumes are generally considered tolerable and less noxious than ABS, care should be taken to minimize exposure, particularly among sensitive persons.
    • _x005F_x000D_
    _x005F_x000D_
    _x005F_x000D_
  • _x005F_x000D_
Colour:
Filament Diameter: 1.75mm
Material: Flexible
Weight on Spool: 750gr
Print Temperature: 210 - 225°C
Printbedtemperature: 30 - 40°C
0 stars based on 0 reviews
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »