Go to wishlist Wishlist

Shopping cart

Your cart is currently empty

PRIMA Select PLA

Up to 12 times tougher
than regular PLA

Very easy to print,
even at low temperatures

Very small risks
for warping

It´s biodegradable
No unpleasant smell

 

PrimaSELECT™ PLA is a very nice 3D Print material, it is non-toxic and does not smell bad when you print with it. Its thermal properties make it easy to get great prints.
Filament from PrimaCreator is supplied on a transparent spool so you can easily see how much filament is left on the spool. Polylactic acid (PLA) is a biodegradable polymer produced from lactic acid, which can be fermented from crops such as corn.

PrimaSELECT™ PLA has a slightly softer feel than regular PLA, it is also more pliable, making it perfect for all printers, including those with a Bowden setup.

PrimaSELECT™ PLA has a slight sheen when the print is finished. PrimaSELECT™ PLA also comes in a wide selection of beautiful and vibrant colors with a nice appearance that are based on the RAL color system which in turn guarantees that you get the same color every time you order a new spool of filament.
PrimaSELECT™ PLA has a slightly softer feel than regular PLA, it is also more pliable, making it perfect for all printers, including those with a Bowden setup.

The results are amazing and the material is extremely strong with very good interlayer adhesion. This also opens up a new world for using PLA. Until now, PLA was brittle and not very strong, but with this new product you can use it for applications that previously required ABS.
Due to the very low shrinkage and the fact that you do not need a heated bed, PrimaSELECT™ PLA is very easy to use in all FDM/FFF printers. Warping is not a factor to consider when using PrimaSELECT™ PLA, nor will it warp when your prints are ready, which is common with cheaper materials.
These properties also make the filament less prone to absorbing moisture, which is a huge leap forward and gives you a huge advantage when it comes to storage. If your printer is equipped with a heated bed, we recommend that you use a temperature setting of 40-60°C. If you have a dual hot-end setup and are going to print with support, we recommend that you use PrimaSELECT™PVA that adheres well to our ABS and is easy to remove. PrimaSELECT™ PVA is even soluble in water. PrimaSELECT™ PLA sticks to BuildTak or glass plate coated with adhesive spray or glue stick.

PrimaSELECT™ PLA is wound on a transparent spool with 750 g of high-quality filament. It is packed in a sturdy box and packed with silica gel to prevent moisture.

PrimaSELECT™ PLA has a slightly softer feel than regular PLA, it is also more pliable, making it perfect for all printers, including those with a Bowden setup.
The results are not far from amazing and the material is extremely strong with very good interlayer adhesion. This also opens up a new world for using PLA. Until now, PLA was brittle and not very strong, but with this new product you can use it for applications that previously required ABS. Due to the very low shrinkage and the fact that you do not need a heated bed, PrimaSELECT™ PLA is very easy to use in all FDM/FFF printers. Warping is not a factor to consider when using PrimaSELECT™ PLA, nor will it warp when your prints are ready, which is common with cheaper materials. The properties also make the filament less prone to absorbing moisture, which is a huge leap forward and gives you a huge advantage when it comes to storage. If your printer is equipped with a heated bed, we recommend using a temperature setting of 40-60°C.
If you have a dual hot-end setup and will be printing with support, we recommend using PrimaSELECT™PVA which adheres well to our ABS and is easy to remove. PrimaSELECT™ PVA is even soluble in water.

PrimaSELECT™ PLA sticks to BuildTak or glass plate coated with adhesive spray or glue stick.

PrimaSELECT™ PLA is wound on a transparent spool with 750 g of high-quality filament. It is packed in a sturdy box and packed with silica gel to prevent moisture.

PrimaSELECT™ PLA are available in 1.75mm and 2.85mm diameters.

11 products

Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »